fbpx

General

Heat Pump Care: What You can do and When to Call a Savannah GA Professional

Published on: July 13, 2012

Heat pumps a popular choice for many homeowners in Savannah GA. Heat pumps are optimal for climates where the temperature does not dip much below 45 degrees Fahrenheit in the winter months. When temperatures do drop below 45 degrees, a supplemental heating system is necessary to maintain the comfort level in the home. Savannah, GA homeowners often opt for heat pumps because these devices heat the home in the winter months and cool the home during the long, hot summers.

Heat pumps are different from electric furnaces and AC units. The heat pump requires unique care and maintenance. There are a few things the homeowner is able to do to maintain the unit. However, in certain situations, an air conditioning service professional or heat pump maintenance technician’s services are required.

Heat Pump Maintenance the Homeowner May Perform

Heat pump maintenance should be performed on a regular basis by the homeowner. Do it yourself heat pump maintenance includes keeping the filters clean and removing anything that may obstruct the free flow of air. Clean filters are essential to ensure that the heat pump functions at an optimal level. If you have questions about how to keep your heat pump filter clean, or which type of filter your unit should use, an air conditioning service professional will be able to provide advice.

Do it yourself heat pump maintenance also includes cleaning debris, dirt and leaves from inside the outdoor compressor unit. Many homeowners use a vacuum cleaner hose or a water hose to clean dirt and debris from within the compressor unit. First, remove the grille from the frame by unscrewing the screws that hold the grille in place. If using a water hose, be careful not to spray the electrical components with water. Carefully remove dirt, leaves, pine needles and any other debris from the compressor unit.

Each year, use a carpenter’s level to make sure the compressor unit is level. If the unit is not level, build up the unit with boards, bricks or crushed rocks. Check the insulation around the piping. If the insulation is worn or torn, replace the insulation with new material. Piping insulation may be purchased from a heating supply or home improvement store. Your air conditioning service technician or heat pump maintenance specialist will also have piping insulation on hand.

If the power to the home is interrupted and is off for an hour or more, the heat pump should not be run for about six to eight hours, particularly if the outside temperature is 50 degrees or below. Set the heat pump to the “Emergency Heat” setting. Allow the heat pump to run in the Emergency Heat mode for six to eight hours.

For other issues with the heat pump, call an air conditioning service company or heat pump maintenance professional. An annual check is recommended to keep the heat pump working at optimal performance. Call an air conditioning service or heat pump professional for additional questions you may have about maintaining your heat pump.