Get a Diagnostic for Your Heating System in MaconPublished on: October 26, 2012
Even though it may seem simple enough to heat your home, you would be amazed at how many components there are involved with your heating system. Any one of those components is capable of breaking down at any point in time. Those that are more obvious will be discussed first to help you understand your HVAC system inside of your Macon GA home.
If you do not have any heat coming out of your vents, make sure your breaker is on and you have a working igniter. When you are not getting an adequate amount of heat, you need to check your filters and ensure they are clean. It is quite easy to block these filters with dust, animal hair and other things that blow around your home. These items are relatively cheap, so it does not pay to wash them off, but rather, you should just buy new filters instead.
Ensure there is no blockage in your vents. If they are located close to the ceiling, you will need to get onto a ladder and look inside of the vents yourself. It will be impossible to see if there is anything blocking the vents from the ground. When your vents are lower to the ground, you need to get onto your knees and look inside of them. Your vents for your heating system are a vital aspect of your Macon GA getting the heat it needs on a cold winter night.
As soon as you have established that not all of your vents are blocked and they are open, you will need to look at your ductwork. In the vast majority of situations, you should have no problem seeing the ductwork inside of your attic above all of the insulation in the ceiling. Look for any potential breaks in the heating system ducts. Turn your heat on and use a tissue to detect any leaks. If you have recently had an infestation of rates of mice, it is entirely possible that there will be a lot of damage in the ducts. These rodents are able to chew through the ducts without any hassles.
Avoid using duct tape to repair any issues with your heating system in Macon. Duct tape will not hold up when put under extreme temperatures, and humidity will only cause the leak to become exaggerated. A few of the building codes will not allow you to use duct tape in the area. It is recommended that you use mastic tape instead of duct tape for these conditions. If you are planning to wrap your ducts in insulation, you may be able to squash some of the heat loss. Make sure you check into the building codes to determine the appropriate material for your heating system.
If you notice there is any noise within your heating system, you might be dealing with any one of potential causes. When you have a heating system that is belt driven, your belt can become stretched out over the course of time. As the temperature fluctuates, your belt will wear out. Loose belts end up becoming extremely squeaky and slipping off their pulley. Replacing these belts is relatively an inexpensive fix to your heating problem.
Rattling in the system may be the sign of loose screws that are in the ductwork or connecting plates. As the metal contracts and expands, you will get the rattling sound throughout your home. It is entirely possible to dent the material to help ensure a tighter fit. Tighten any screws that may be loose, but avoid overdoing it and screwing through any wires or insulation.
Another potential cause of inadequate heat for your home is that your heating system in Macon may not be large enough to cover the size of your home. On the pump, you should be able to see what the rating is for your unit. If that is your case, you will want to have the system upgraded by a professional who can help evaluate your needs.
Homes that do not have adequate amounts of duct work will find they are not able to get the heat they require from their heating system in Macon. Flow ratings are the key measurement in this situation. In an ideal situation, your system should be producing 50 to 60 liters every second in a kilowatt-hour. Even though it is not an easy task, you can replace the ductwork in your home. Getting a professional heating contractor to your home to help address any questions or concerns you have about your system is one of the most important steps you can take. Reputable contractors will provide you with references and demonstrate a trustworthy attitude.